Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 180

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 234
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 179
Configuring IP Multicasting and Multimedia Services
A-10
303527-A Rev. 00
Parameter: Route Listen
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Circuit
Default: Disable
Options: Enable
|
Disable
Function: Receives the default route (0.0.0.0) on this interface.
Instructions: Enable this feature if you want DVMRP to listen for a default route on this
interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.25
Parameter: Report Depend Probe
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Circuit
Default: Disable
Options: Enable
|
Disable
Function: Specifies the conditions under which DVMRP accepts a route report.
According to the protocol, DVMRP must send a probe packet before sending
the route report packet to its neighbors. Some vendor implementations,
however, do not send probes before sending reports.
Instructions: By default, DVMRP processes all received route reports. Enable this feature if
you want DVMRP to process only routes received from neighbors that send
probe packets.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.26
Vista de pagina 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 233 234

Comentarios a estos manuales

Sin comentarios