
Configuring IGMP Relay
303527-A Rev. 00
9-11
Using Site Manager
Specifying the Relay Interface Type
Use the Type parameter to specify that the IGMP-R interface is configured on one
of the following types of interface:
• A downstream interface connecting the IGMP-R device to IGMP hosts (the
default)
• An upstream interface connecting the IGMP-R device to the primary MOSPF
boundary router
• An upstream interface connecting the IGMP-R device to the backup MOSPF
boundary router
You can use the BCC or Site Manager to specify the interface type.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
IGMP
. The IGMP menu opens.
4. Choose
Global
. The IGMP Global Configuration window
opens.
5. Set the
Relay Forwarding Options
parameter. Site Manager:
Relay Upstream
Forwarding parameter: page A-18
6. Click on
Save
. You return to the Configuration Manager
window.
Comentarios a estos manuales