Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario descargar pdf (Pagina 160)

Configuring IP Multicasting and Multimedia Services

9-10

303527-A Rev. 00

Configuring Upstream Data Forwarding

By default, an IGMP-R device connected to a primary and backup MOSPF

boundary router uses the primary upstream interface when both the primary and

the backup interfaces are active. When only one interface is active, the IGMP-R

device always uses that interface.

You can use the BCC or Site Manager to specify which interface to use for

upstream data forwarding.

Using the BCC

Navigate to the IGMP Relay global prompt and enter:

fwd-option

option

option is one of the options listed in Table 9-1.

For example, the following command configures IGMP Relay to use both

upstream interfaces if both interfaces are active:

relay# fwd-option both

relay#

Table 9-1. IGMP Relay Forwarding Options

Option Meaning

Primary

(default)

IGMP Relay uses the primary upstream interface only if both the

primary interface and the backup interface are active.

Backup IGMP Relay uses the backup upstream interface only if both the

primary interface and the backup interface are active.

Both IGMP Relay uses both the primary upstream interface and the

backup upstream interface if both interfaces are active.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 233 234

Sin comentarios

Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 160