Avaya Configuring Bridging Services Manual de usuario Pagina 87

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 208
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 86
Using Source Routing Bridge Services
117351-A Rev. A 2-31
See “Editing Source Routing Parameters”on page 2-32 for instructions.
Figure 2-16. Source Route Spanning Tree Autoconfiguration Window
Parameter: Bridge Priority
Default: 128
Options: 0 to 65535
Function: Combined with the Bridge MAC Address parameter, assigns a 64-bit
bridge ID to the router. This parameter supplies the most significant 16
bits of the bridge ID, while Bridge MAC Address supplies the remaining
(least significant) 48 bits.
The spanning tree uses the bridge ID to select the root bridge. In selecting
the root bridge, the spanning tree chooses the bridge with the
lowest-number bridge ID. Thus, the lower the value of this parameter, the
more likely that the router will be selected as the root bridge.
Instructions: Enter a decimal value from 0 to 65535.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.1.33
Vista de pagina 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 207 208

Comentarios a estos manuales

Sin comentarios