
Configuring Bridging Services
2-44 117351-A Rev. A
Parameter: Encapsulation Format
Default: Proprietary
Options: Proprietary
| Standard
Function: Indicates Bay Networks proprietary encapsulation format or standard
encapsulation format.
Instructions: To run source routing over a frame relay network:
– If your router, running software Version 8 or higher, communicates
with a third-party router that supports RFC 1490, and you configured
both routers to run source routing over frame relay, select Standard
for RFC 1490 standard frame relay encapsulation.
– If your router, running software Version 8 or higher, communicates
with a Version 5 Bay Networks router, and you configured both
routers to run source routing over frame relay, accept the default,
Proprietary.
– If your Version 8 router communicates with a Version 7 Bay
Networks router, and you configured both routers to run source
routing over frame relay, select Standard.
– If your router, running software Version 8 or higher, communicates
with another Version 8 router, and you configured both routers to run
source routing over frame relay, you can select either Proprietary or
Standard; however, you must set the same encapsulation format for
both routers.
If you want to bridge between source routing token ring and FDDI end
stations:
– If your router, running software Version 8 or higher, connects token
ring end stations to FDDI end stations, select Standard for standard
native encapsulation.
– If your router, running software Version 8 or higher, communicates
with a third-party router via an FDDI network, and each router
connects to a token ring network, select Standard.
Comentarios a estos manuales