Avaya Configuring Bridging Services Manual de usuario Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 208
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
117351-A Rev. A
xvii
About This Guide
If you are responsible for configuring bridging services, you need to read this
guide.
Before you Begin
Before using this guide, you must complete the following procedures. For a new
router:
Install the router (refer to the installation manual that came with your router).
Connect the router to the network and create a pilot configuration file (refer to
Quick-Starting Routers
,
Configuring BayStack Remote Access
, or
Connecting
ASN Routers to a Network)
.
If you want to Go to
Learn about transparent bridging services and how to enable bridging
services and spanning tree on an interface
Chapter
1
Learn about source route bridging and how to enable and configure
source route bridging
Chapter 2
Learn about and customize NetBIOS services Chapter 3
Learn about the transparent-to-source routing translation bridge and
how to configure it on your router
Chapter 4
Use native mode LAN services to define closed user groups within a
shared bridging environment
Chapter 5
Obtain the default settings for Site Manager parameters (you can also
obtain this information using Site Manager online Help)
Appendix A
Obtain information about the components of a source route frame Appendix B
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 207 208

Comentarios a estos manuales

Sin comentarios