
Using Native Mode LAN Services
117351-B Rev. 00
5-9
NML Interface Parameter Descriptions
Use the following descriptions as a guide when you configure the parameters in
the NML Interfaces window (refer to Figure 5-4
).
Parameter: Disable
Default: Enabled
Options: Enabled
|
Disabled
Function: Enables and disables the NML service on this circuit.
Instructions: Set to Disabled if you want to temporarily disable NML on this circuit
rather than delete it. Set to Enabled if you previously disabled NML but
now want to reenable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.5.2.1.2
Comentarios a estos manuales