
Configuring IPv6 Services
3-14 118428-A Rev. A
Specifying an MTU Size for the Link
By default, IPv6 uses the default MTU size for the underlying medium.
You can specify a different MTU size for the configured link from 0 to 65535.
IPv6 considers this value only if it is less than the default MTU of the underlying
medium.
Enter 0 if you want IPv6 to use the default MTU of the underlying medium.
You can use the following Site Manager procedure to perform this operation.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IPv6. The IPv6 menu opens.
3. Choose Edit IPv6 Interfaces. The IPv6 Interfaces window opens.
4. Click on the interface you want to edit. Site Manager displays the parameter
values for that interface.
5. Set the Link MTU parameter. Click on
Help or see the parameter description on
page A-5.
6. Click on Apply, and then click on Done. Site Manager returns you to the
Configuration Manager window.
Comentarios a estos manuales