
Configuring IPv6 Services
3-2 118428-A Rev. A
Customizing IPv6 Globally
When you configure an IPv6 interface, IPv6 runs on the router with default values
for all global parameters. You customize IPv6 on the router by modifying global
parameters as described under the following topics:
Enabling and Disabling Global IP
By default, IPv6 is enabled on the router.
You can use the following Site Manager procedure to change the state as required.
Topic Page
Enabling and Disabling Global IP 3-2
Configuring IPv6 in Not-Forwarding Mode 3-3
Supplying a Value for the Hop Limit Field 3-4
Specifying a Minimum Link MTU Size 3-5
Enabling and Disabling MTU Path Discovery 3-6
Specifying an MTU Path Timeout Period 3-7
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IPv6. The IPv6 menu opens.
3. Choose IPv6 Global. The Edit IPv6 Global Parameters window
opens.
4. Set the Enable parameter. Click on Help
or see the parameter description on page
A-1.
5. Click on OK. Site Manager returns you to the
Configuration Manager window.
Comentarios a estos manuales