
Configuring Frame Relay Services
A-52 117376-B Rev. 00
Parameter: Congestion Timer
Path: Configuration Manager (select a connector) > Edit Connector window > Edit
Circuit > Services > Frame Relay Service List window > SVCs > Add
Default: 1
Options: 0.5 to 5 seconds, in 0.5-second intervals
Function: Specifies the length of time, in seconds, during which the router counts
congestion notifications. If the router receives the number of congestion
notifications set by the congestion counter parameter, the router stops
transmitting data. The router resumes transmission once it stops receiving
congestion notifications.
Instructions: Set the length of time the router should count congestion notifications from the
network. If you set this parameter for a long time period, the router may be less
likely to stop transmission for an intermittent congestion condition. However,
the router may be slow to detect congestion, resulting in long transmission
delays once the congestion has cleared.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.10.1.29
Parameter: Congestion Counter
Path: Configuration Manager (select a connector) > Edit Connector window > Edit
Circuit > Services > Frame Relay Service List window > SVCs > Add
Default: 20
Options: 1 to 500 notifications
Function: Indicates the maximum number of congestion notifications that the router can
receive during the congestion timer period before it stops transmitting. If the
router reaches the value set by this parameter, it determines the line is congested
and stops transmitting.
Instructions: Set the congestion count. The smaller the number, the more quickly the router
detects congestion and stops transmitting. The value of this parameter applies to
all VCs that you do not individually configure.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.10.1.30
Comentarios a estos manuales