Avaya Configuring Frame Relay Services Manual de usuario Pagina 101

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 100
Site Manager Parameters
117376-B Rev. 00 A-5
Parameter: Mgmnt Type
Path: Configuration Manager > Protocols > Frame Relay > Interfaces
Default: ANSI T1.617D
Options: DLCMI None
| Rev 1 LMI | ANSI T1.617D | CCITT Annex A
| LMI Switch | Annex D Switch | Annex A Switch
Function: Specifies the management protocol that the router and the frame relay network
use to communicate status information. Routers connected back to back also use
a management protocol to exchange status information.
Option for No Management
DLCMI None - provides no management interface between the router and the
frame relay network. In the absence of management support, you must
configure all PVCs manually.
Options for User Management
Rev 1 LMI - provides user-side management services as specified by Revision 1
of the Local Management Interface standard.
ANSI T1.617D - provides user-side management services as specified in
Annex D to ANSI standard T1.617-1991.
CCITT Annex A - provides user-side management services as specified by the
ITU-T (formerly CCITT).
Options for Limited Management for DCE Switch (primarily for
troubleshooting)
LMI Switch - offers limited management services for the DCE side of the
connection as specified by Revision 1 of the Local Management Interface
standard.
Annex D Switch - provides limited management services for the DCE side of
the connection as specified in Annex D to ANSI standard T1.617-1991.
Annex A Switch - provides limited management services for the DCE side of
the connection as specified by the ITU-T.
Instructions: Select the management protocol for the frame relay network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.1.1.6
Vista de pagina 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 161 162

Comentarios a estos manuales

Sin comentarios