Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 27)

Starting SNMP, BootP, and DHCP Services

308644-14.00 Rev 00

1-7

Starting BootP/DHCP Relay

Using Site Manager you can start BootP/DHCP relay using default values for all

parameters. If you decide to change some or all of the default values, see Chapter

5, “Customizing BootP/DHCP Relay.”

Before you begin, you must verify that IP is configured on an interface, as

described in “Configuring IP for Global Protocols

” on page 1-2. You can also

enable IP, BootP, and BootP/DHCP on the router simultaneously.

To enable BootP/DHCP relay on an interface, complete the following tasks:

6. Choose

File

. The File menu opens.

7. Choose

Exit

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System repsonds

1. Enable BootP on the interface.

For instructions, see “Starting BootP

Services” on page 1-6.

2. Choose

Protocols.

The Protocols menu opens.

3. Choose

. The IP menu opens.

4. Choose

BOOTP

. The BOOTP menu opens.

5. Choose

Relay Agent Interface Table

. The BootP Relay Agent Interface Table

window opens.

6. Set the

Pass Through Mode

parameter to

DHCP

or to

BootP/DHCP

7. Click on

Apply

8. Edit the parameters in this window.

For instructions, see “Customizing BootP

Relay Agent Parameters” on page 4-2.

You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 173 174

Comentarios a estos manuales

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring BOOTP Services