Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 102)

Configuring SNMP, BootP, and DHCP Services

4-4

308644-14.00 Rev 00

Using the Technician Interface

To enable the ARP cache entry feature using the Technician Interface, set the

wfBootpRelayIntfArpCache MIB variable to a value of 1. For example, this

command sets the BootP relay agent interface ARP cache MIB variable to enabled

on interface 10.10.10.1:

s wfBootpRelayIntfEntry.wfBootpRelayIntfArpCache.10.10.10.1 1; commit

To disable ARP cache support, set the wfBootpRelayIntfArpCache MIB variable

to a value of 2. By default this variable is disabled.

To display the setting of the ARP cache entry MIB variable on all interfaces, enter

the following command:

g wfBootpRelayIntfEntry.wfBootpRelayIntfArpCache.*

Specifying the Maximum Number of Hops from Client to Server

A hop is the logical distance between a source device and a destination device.

Source-device combinations can include a BootP relay agent and a BootP server, a

client and a BootP relay agent, or two BootP relay agents.

By default, the maximum number of hops that a packet can take from the source

device to the destination device (client to server) is four. If the value in the hops

field of a BOOTREQUEST packet is greater than the configured maximum value,

the router drops the packet.

To specify the maximum number of hops from client to server, complete the

following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

(continued)

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 173 174

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 102