
Configuring SNMP, BootP, and DHCP Services
6-6
308644-14.00 Rev 00
To enable or disable safe mode on the DHCP server, complete the following tasks:
Specifying the Maximum Number of Pending Leases
By default, the maximum number of lease requests sent to the DHCP server that
are pending commitment by the NetID Server Manager is 2. You can increase the
maximum number of pending leases by specifying a value from 1 through 255.
When the number of lease requests sent to the NetID Server Manager and pending
commitment by the NetID Server Manager reaches the configured value, the
DHCP server holds all subsequent lease requests. When the number of pending
requests decreases to half this value, the DHCP server begins forwarding requests
to the NetID Server Manager again.
To specify the maximum number of lease requests sent to the DHCP server that
are pending commitment, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols.
The Protocols menu opens.
2. Choose
Global Protocols
. The Global Protocols menu opens.
3. Choose
DHCP
. The DHCP menu opens.
4. Choose
Global.
The DHCP Global Parameters window
opens.
5. Set the
Safe Mode
parameter. Click on
Help
or see the parameter description on
page A-26.
6. Click on
OK
. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols.
The Protocols menu opens.
2. Choose
Global Protocols
. The Global Protocols menu opens.
(continued)
Comentarios a estos manuales