Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 104)

Configuring SNMP, BootP, and DHCP Services

4-6

308644-14.00 Rev 00

Specifying the Relay Mode for Packet Forwarding

BootP and DHCP use the BootP relay agent to forward packets. You can configure

the BootP relay agent to forward BootP packets, DHCP packets, or both. The

default setting is BootP, which allows the interface to transmit only BootP packets.

Change the setting if you want to transmit DHCP packets.

To set the relay mode on a BootP interface, complete the following tasks:

5. Set the

Timeout Secs.

parameter.

Click on

Help

or see the parameter

description on page A-17.

6. Click on

Apply

7. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you configured for BootP

services on the router.

5. Set the

Pass Through Mode