Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 101)

Customizing BootP

308644-14.00 Rev 00

4-3

Enabling ARP Cache Support

Some boot PROM devices do not support the Address Resolution Protocol (ARP).

Without ARP support, the client PC or workstation cannot use the BootP relay

agent (that is, the BayRS router configured as a BootP relay agent) to download a

file over the network.

To accommodate devices that do not run ARP, you can configure the router to

create an ARP cache entry based on the information received in the BootP reply

from the server. By default, this feature is disabled.

Using Site Manager

To enable ARP cache entry support, complete the following tasks:

Note:

Enabling or disabling the ARP cache feature has no effect on the

operation of DHCP.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you configured for BootP

services on the router.

5. Set the

ARP Cache Enable

parameter.

Click on

Help

or see the parameter

description on page A-18.

6. Click on

Apply

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 173 174

Comentarios a estos manuales

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 101

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring BOOTP Services