Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 107)

Customizing BootP

308644-14.00 Rev 00

4-9

To enable BootP on an interface, complete the following tasks:

Specifying Interfaces to Receive and Relay BOOTREQUEST Packets

You specify a forwarding route for BOOTREQUEST packets by defining a

relationship between an interface that you want to receive BOOTREQUEST

packets and another to transmit BOOTREQUEST packets. When you define this

type of relationship, the interface pair appears in the BootP relay agent forwarding

table.

Depending on the configuration of your network, you can specify:

• One input IP interface to forward packets to multiple output IP interfaces

• Multiple input interfaces to forward packets to multiple output interfaces

• Multiple input interfaces to forward packets to one output interface

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the link or net module connector.

The Edit Connector window opens.

2. Choose

Edit Circuit

. The Circuit Definition window opens.

3. Choose

Protocols

. The Protocols menu opens.

4. Choose

Add/Delete

. The Select Protocols window opens.

5. Select

BOOTP

and click on

6. Choose

File

. The File menu opens.

7. Choose

Exit

. You return to the Configuration Manager

window.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 173 174

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 107