Avaya BCM 2.0 IP Telephony Manual de usuario Pagina 66
- Pagina / 76
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
66 Configuration
Enterprise Edge 2.0 IP Telephony Configuration Guide P0911590 Issue 02
Table 14 Sample Remote Gateway Configuration
The Remote Gateway Configuration menu contains the following are fields:
• The Name field contains the name connected with the IP address. Ensure this
name is correct before pressing the Save button. When saved, the name cannot
be changed.
• The IP field contains the IP address or the machine name of the destination
gateway. If the machine name is used, disable QoS. Only enter an IP address or
machine name one time in the Remote Gateway Configuration table.
• The Destination Digits field contains the leading dialed digits that indicate
which calls route to this remote gateway. Separate groups of dialed digits with
a space. See the Dialing plan section on page 43. IP Telephony uses the best
match algorithm to determine call destinations.
• The QoS Monitor field indicates the status of QoS monitor for the destination.
• The QoS Tx Threshold and QoS Rx Threshold indicate the minimum QoS
required for traffic to route over the IP Telephony to or from the defined
destination. Valid thresholds are between 0 and 5.00.
Modifying the Remote Gateway Configuration table
The pull-down menu Table contains the following options:
• Add Entry
• Delete Entry
• Modify Entry
The Add Entry option allows the administrator to add a new entry to the Remote
Gateway Configuration table. If the administrator highlights an entry on the
existing table, and selects the Add Entry option, a dialog box appears. Insert the new
entry at the end of the table. Enable or disable the QoS monitor for each entry with
the radio button.
The Delete Entry option allows the administrator to delete an entry from the Remote
Gateway Configuration table. If the administrator highlights an entry on the
existing table, and selects the Delete Entry option, a dialog box appears. The dialog
box asks the administrator to confirm either or not to delete an entry. The Delete
Entry option is not available when there is no entry on the existing table highlighted.
Name IP Destination
Digits
QoS
Monitor
QoS Tx
Threshold
QoS Rx
Threshold
Toronto 10.10.10.1 61 Disabled 5.00 5.00
Santa Clara 10.192.5.2 6265 61408 Enabled 4.35 4.00
Montreal 10.192.5.5 6852 61514 Enabled 3.23 4.80
Calgary 10.192.5.6 6775 61406 Disabled 5.00 5.00
- Enterprise Edge 2.0 1
- IP Telephony 1
- Configuration Guide 1
- Contents 3
- 4 Contents 4
- Contents 5 5
- 6 Contents 6
- Overview 7
- About this document 8
- System Functions 8
- Dialing plan support 9
- Network Quality of Service 10
- Overview 11 11
- Network Performance Utilities 12
- Silence compression 13
- Echo cancellation 13
- Fax calls 14
- Alarm Notification 14
- Jitter buffer 14
- Engineering guidelines 15
- 16 Engineering guidelines 16
- Engineering guidelines 17 17
- Multiple network interfaces 18
- Method 1 19
- Method 2 19
- LAN engineering 20
- WAN engineering 22
- Link utilization 23
- 24 Engineering guidelines 24
- Setting QoS 26
- Measuring Intranet QoS 27
- Recording routes 28
- Adjusting ping measurements 29
- Measurement procedure 29
- Further network analysis 31
- Reduce link delay 32
- Reducing hop count 32
- Engineering guidelines 33 33
- Routing issues 34
- Traffic mix 35
- TCP traffic behavior 35
- Implementing the network 36
- IP telephony settings 37
- Engineering guidelines 39 39
- Figure 5 Silence compression 39
- Fallback threshold 42
- Dialing plan 43
- 44 Engineering guidelines 44
- Engineering guidelines 47 47
- 48 Engineering guidelines 48
- Figure 8 Toll bypass 48
- Setting 49
- 52 Engineering guidelines 52
- Intranet QoS monitoring 53
- User feedback 54
- Engineering checklist 55
- 56 Engineering checklist 56
- Installation 57
- Configuring a remote gateway 58
- Installation 59 59
- 60 Installation 60
- Configuration 61
- User Interface Overview 62
- Local Gateway Configuration 63
- Remote Gateway Configuration 65
- Configuration 67 67
- 68 Configuration 68
- Maintenance 69
- 70 Maintenance 70
- Interoperability 71
- No feedback busy station 72
- Glossary 73
- 76 Index 76
- Voice Jitter Buffer 76
Relacionado con productos y manuales para Gateways / Controladores Avaya BCM 2.0 IP Telephony
(442 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales