Avaya ATM Link Modules and Routing Engines in BN Platforms Manual de usuario descargar pdf (Pagina 19)

1-1

Chapter 1

Installing ATM Link Modules

To install an ATM link module, complete these preliminary tasks as needed:

• Choose a slot

• Remove a link module

• Configure jumper settings

This chapter describes each of these tasks, as well as how to install the ATM link

module.

Choosing a Slot

You can install the ATM link module in

• Slots 2 through 5 in the BLN platform (Figure 1-1)

• Slots 2 through 5 in the BLN-2 platform (Figure 1-2)

• Slots 1 through 6 and Slots 8 through 14 in the BCN platform (Figure 1-3)

Note:

In this guide, the term ATM link module includes all Nortel Networks

ARE link modules (ARE OC-3, DS-3, E-3, and SONET/SDH) , unless referring

to a specific model. The term does not include the ARE processor module.

Note:

You must install the link module in a slot opposite an ARE processor

module. (See Chapter 2 for instructions on installing an ARE processor

module.) Do not install an ATM link module in a slot opposite a Fast Routing

Engine (FRE or FRE-2) processor module. Likewise, do not install a FRE or

FRE-2 link module into a slot opposite an ARE processor module.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Sin comentarios

Avaya ATM Link Modules and Routing Engines in BN Platforms Manual de usuario Pagina 19