Avaya Using Technician Interface Software Manual de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 382
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
Configuring the Console Port
117381-A Rev. A 2-3
Using the list Command
You can list and review all serial port attributes by entering the following
command line at the Technician Interface prompt:
list wfSerialPortEntry
Using the set Command
Enter one of the following Technician Interface commands to configure a console
port parameter:
set wfSerialPort Entry.
<attribute_name>.<port_no.> <option>
set wfSerialPort Entry.
<attribute_no.>.<port_no.> <option>
set Refers to the Technician Interface set command. You
must have Manager access to issue a
set command.
wfSerialPortEntry
Refers to the MIB attribute name associated with all
serial port parameters.
<attribute_name>
Is the MIB attribute name associated with one of the
serial port parameters.
<attribute_no.>
Is the MIB attribute number associated with one of
the serial port parameters.
<port_no.>
Is the number of the serial port you are configuring.
<option>
Is the new setting taken from the Options list.
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 381 382

Comentarios a estos manuales

Sin comentarios