Avaya Using Technician Interface Software Manual de usuario Pagina 253

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 382
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 252
System Administration
117381-A Rev. A 8-91
Obtaining IPv6 Interface Statistics
The ip6 stats command displays version 6 statistics for all interfaces (by not
specifying an interface index) or a specific interface on the device.
Example (ip6 stats
<ifindex>
)
Enter the following command to display data for interface 1 on the device:
ip6 stats 1
Interface 1 (PPP to Quincy_Adams) is Up:
Link: PPP at 64102 bps (circuit 3)
Neighbor Discovery: Off, Router Advertisements: Off
Address(es): FE80::0001:A2B0:1FBE (link-local)
Rx 434756, Tx 441626, Drop 0, Err 0
Icmp In: DestUnr 0, TimeExc 0, ParmProb 0, TooBig 0
Icmp Out: DestUnr 0, TimeExc 0, ParmProb 0, TooBig 0
Icmp In: Echos 0, EchoRep 0, RS 0, RA 0, NS 0, NA 0
Icmp Out: Echos 0, EchoRep 0, RS 0, RA 0, NS 0, NA 0
Technician Interface Commands and Access Levels
The Technician Interface provides two access levels:
User access level accepts read-only commands.
Manager access level accepts all Technician Interface commands.
T
able 8-13 lists all Technician Interface commands and their associated access
levels.
Table 8-13. Technician Interface Access Levels
Command User Manager
!
✔✔
alias
✔✔
arrayenv (see
Writing Technician Interface Scripts
)
✔✔
atmarp
✔✔
attr (DOS only)
✔✔
(continued)
Vista de pagina 252
1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 381 382

Comentarios a estos manuales

Sin comentarios