Avaya Using Technician Interface Software Manual de usuario descargar pdf (Pagina 44)

Using Technician Interface Software

2-4

308657-14.00 Rev 00

Using the commit Command

Enter the following command after issuing one or more

set

commands:

commit

The

commit

command causes the changes you made to the configuration to take

effect in active memory, but not in flash memory. You must use the

save

command subsequently to save changes to a configuration file (config) and flash

volume on the router.

The Technician Interface software service resets when you enter the

commit

command.

Using the save Command

After you

set

and

commit

changes to the current configuration running in active

memory on the router, use the

save

command to store that configuration to a file

on a flash memory volume, as follows:

save config

<vol>

Console Port Parameters

This section describes parameters for configuring the serial (console) port on the

router. Each parameter description includes the following:

• Parameter

• Attribute name

• Attribute number

• Nortel Networks default setting

• Options or range of valid settings

• Parameter’s function

• Instructions for setting the parameter

Note:

You can also use the

save

command to save the current contents of the

router’s event log, environment variable list, or alias list. See Chapter 5,

Chapter 7, and Chapter 8 for more information about these applications of the

save

command.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 343 344

Comentarios a estos manuales

Sin comentarios

Avaya Using Technician Interface Software Manual de usuario Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Using Technician Interface Software