Avaya Using Technician Interface Software Manual de usuario descargar pdf (Pagina 19)

308657-14.00 Rev 00

xix

Preface

The Technician Interface is a command-line interface that lets you manage Nortel

Networks

™

routers. You can use the Technician Interface to install a router,

maintain or diagnose router operation, and monitor and configure certain basic

router functions.

Before You Begin

If you are responsible for installing or maintaining a Nortel Networks

router using

Nortel Networks Technician Interface commands, you need to read this guide.

Before using this guide to issue Technician Interface commands, you must

complete the following procedures:

• Install the hardware platform.

• Use one of the following methods to establish a connection to the platform:

-- Connect the serial port of an ASCII terminal device (for example, a DEC

VT100) directly to the console port of the platform.

-- Connect the serial port of a workstation or PC directly to the console port

of the platform. (Run ASCII terminal emulation software on the

workstation or PC.)

-- Dial in to the console port of the platform from a workstation or PC

running ASCII terminal emulation software. This alternative requires one

modem locally attached to your workstation or PC, and another modem

locally attached to the console port of the platform you want to access.

-- Establish a Telnet (in-band) connection to the platform.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 343 344

Sin comentarios

Avaya Using Technician Interface Software Manual de usuario Pagina 19