Avaya Using Technician Interface Software Manual de usuario descargar pdf (Pagina 165)

System Administration

308657-14.00 Rev 00

7-29

If you want to verify that the image resident on the bootstrap PROM matches

the freboot.exe file, use the

prom -v command.

• Router software image file for the various router models are named as

follows:

When the system boots, it automatically loads the default router software image

(unless you specify another router software image) from another slot into memory

on the processor module or, if another slot is unavailable, from the file system to

memory. To upgrade with a new image, transfer the image to the file system and

reset the system; do not use the

prom -w command when upgrading with a new

router software image.

The sections that follow describe how to use the

readexe, prom -w, and prom -v

commands to validate, upgrade, and verify executable software.

Validating an Executable File

You validate executable files before upgrading by using the readexe command.

This command calculates file header and image checksums on executable files on

the file system, verifies that the checksums match those within the files, and

displays the results and all file header information.

Enter the following command and parameter to validate an executable file on the

active volume, where

is the name of the executable file:

readexe

AN, ANH

an.exe

ARN

arn.exe

ASN

asn.exe

BCN, BLN, BLN-2

bn.exe

System 5000 routers

(Models 5380, 5580, and 5780)

s5000.exe

Note:

You cannot edit executable files.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 343 344

Sin comentarios

Avaya Using Technician Interface Software Manual de usuario Pagina 165