Avaya Configuring IP Utilities Manual de usuario descargar pdf (Pagina 220)

Configuring IP Utilities

D-2

304234-A Rev 00

Creating and Naming the Policy

To create an IP global access policy and assign the policy a unique name, navigate

to the IP global prompt and enter:

access-policy

polname

policy_name>

policy_name

is a unique name for this policy.

For example, the following command sequence creates a policy named policy_1

and displays the current (default) values for the policy:

ip# access-policy polname policy_1

access-policy/policy_1# info

on ip

state enabled

action deny

log on

service telnet

precedence 0

polname policy_1

Specifying the Network to Which the Policy Applies

You must specify the IP address or range of contiguous addresses to which the

policy you have created applies. Navigate to the policy-specify prompt and enter:

network

ip_address/ip_mask>

ip_address/ip_mask

is an address/mask pair indicating the IP address or range of

IP addresses to which this policy applies.

For example, the following command specifies 192.32.150.0/255.255.255.0 as the

address and mask to which policy_1 applies:

access-policy/policy_1# network 192.32.150.0/255.255.255.0

network/policy_1/192.32.150.0/255.255.255.0#

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 226 227 228

Sin comentarios

Avaya Configuring IP Utilities Manual de usuario Pagina 220