Avaya Business Communications Manager - CallPilot Message Networking Manual de usuario descargar pdf (Pagina 21)

Chapter 2 Setting up Digital Networking 21

CallPilot Message Networking Set Up and Operation Guide

To check that Avaya BCM is not configured to use DNS

1 Start Business Element Manager.

2 On the Configuration tab, choose the Data Services folder.

The system tasks appear.

3 Choose the DNS task.

The Domain Name Service tab appears.

4 Ensure that the Enable DNS box is not selected.

5 Ensure that the Primary (& Sec.) Server IP Addr field is empty. If it is not, delete any

entries.

To check that a Host Name is entered on the Avaya BCM

1 Start Business Element Manager.

2 On the Configuration tab, choose the System folder.

The system tasks appear.

3 Choose the Identification task.

The System Identification tab appears.

4 Enter a system name in the System Name box, if one is not entered.

A system name can be any name (for example, myCompany).

To change your local CallPilot Host name or IP address

1 Make the change to the host name or IP address first.

2 Create a hosts file, making sure that the new host name is the first entry in the hosts file.

3 FTP the hosts file to your Avaya CallPilot’s 7.0/ST directory. You must FTP the file using the

ASCII format, NOT binary. If you use binary the hosts file will not work. The FTP login and

password for CallPilot are as follows:

• FTP user ID: tas

• FTP password: apo A-IV

4 Reboot Avaya CallPilot for the new settings to take effect.

Note: Ensure the Avaya BCM is using a static IP address and DHCP is disabled.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 69 70

Sin comentarios

Avaya Business Communications Manager - CallPilot Message Networking Manual de usuario Pagina 21