Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 56)

Configuring Frame Relay Services

4-14

Select a value for the Enable Multi-line parameter. (Refer to Chapter 2

for information about multiline.)

7. Click on OK to return to the Frame Relay PVC List window (Figure 4-3).

8. To change the conﬁguration of the PVC you just added, complete the

procedure described in “Editing PVC Conﬁguration Parameters” on

page 4-15.

Parameter: DLCI Number

Default: None

Options: The Frame Relay switch provider assigns DLC I numbers. These assigned

numbers are valid options.

Valid DLCI numbers vary based on the Frame Relay address length. The

DLCI numbers that the switch provider assigns are generally in the

following ranges:

Function: Speciﬁes the PVC identiﬁcation number that the Frame Relay network

uses to direct data. If you are running IP over Frame Relay, the router uses

this number as the MAC address for an adjacent host. Refer to

Conﬁguring IP Services for more information about adjacent hosts.

Instructions: Enter the decimal number that the Frame Relay provider assigns.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.2.1.4

Address Length DLCI Number

2 byte 16 to 1007

3 byte 1024 to 64511

4 byte 131072 to 8257535

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 83 84

Sin comentarios

Avaya Configuring Frame Relay Services Manual de usuario Pagina 56