Avaya Configuring ATM Services Manual de usuario Pagina 376

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 375
Configuring ATM Services
B-4
303514-A Rev. 00
errors
[
-enabled
|
-disabled
] [
-slot
<slot>
|
-slot
<slot>/<connector>
]
[
-sample
]
Displays the ATM module physical interface errors table for the ATM routing engine
(ARE).
The output includes the following line receive error statistics:
phy config
[
-enabled
|
-disabled
] [
-slot
<slot>
|
-slot
<slot>/<connector>
]
[
-sample
]
Displays the ATM module physical interface table for the ATM routing engine (ARE).
The output includes the following physical interface statistics:
Slot Slot number on which the ATM physical interface resides.
Conn Connector number of the physical interface.
Circuit Circuit name assi
g
ned to the interface.
Invalid Headers Number of received cells dropped because of incorrect header
format.
Over Sized SPDUs Number of packets dropped because their size was
g
reater than the
MTU specified for the interface.
Crc Errors Cyclical redundancy check errors.
Crc10 Errors Number of OAM cells dropped because they had an invalid
CRC-10.
Rx Lack of Rsrcs Number of packets dropped because no host buffers were available
to hold the incomin
g
data.
Slot Slot number on which the ATM physical interface resides.
Conn Connector number of the physical interface.
Circuit Circuit name assi
g
ned to the interface.
Phy State Physical state of the ATM line (Up or Down).
Speed (Mbps) Estimate of the interface's current bandwidth: 155,520,000 Mb/s,
140,000,000 Mb/s, 100,000,000 Mb/s, 44,736,000 Mb/s, or
34,368,000 Mb/s.
Type Interface type: OC-3 MM (multimode), OC-3 SM (sin
g
le mode),
DS-3, or E-3.
Framin
g
Mode Transceiver mode: SDH, SONET, CBIT, M23, G751, or G832.
Vista de pagina 375
1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 427 428

Comentarios a estos manuales

Sin comentarios