Avaya Configuring BayStack Remote Access Manual de usuario Pagina 31
- Pagina / 140
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Understanding Tools and Options
308614-14.00 Rev 00
1-13
Preparing for the Initial Startup
The first time you turn on the BayStack router, it begins a startup procedure to
obtain the files it needs to operate routinely over the network. For the procedure to
be successful, you must first complete the following tasks:
• Select the initial startup option (see the next section,“Selecting the Initial
Startup Option”)
• Set up the network to support the startup option (see Chapter 3)
• For options other than EZ-Install, configure the BayStack router for the
startup option (see Chapter 4)
• Provide a tailored configuration file for the BayStack router (see “Providing a
Tailored Configuration File” on page 1-15)
• Coordinate the initial startup with a person at the BayStack router site
The person at the BayStack router site installs the hardware and cables, and
then initiates the appropriate startup option. The BayStack router hardware
installation guide explains these tasks in detail.
Selecting the Initial Startup Option
By default, the EZ-Install procedure begins when you turn on the BayStack router.
You can change the initial startup option to Local Boot or Netboot.
This section reviews the options for initial startup and lists the requirements for
each startup option. “Selecting the Routine Startup Option
” on page 1-16 provides
similar information for routine operation. “Steps for Completing Startup Options
”
on page 1-18
describes the procedure for configuring a startup option.
Note:
As an alternative to another person performing the initial startup at the
BayStack router site, you can perform these tasks using a modem connection.
Note:
Even if you use the default option, EZ-Install, Nortel Networks strongly
recommends that you connect a modem or a console to the BayStack router for
initial startup. With a console connection, you can issue commands to the
BayStack router and display messages. This is very useful if you have network
problems after installation.
- Configuring BayStack 1
- Remote Access 1
- Trademarks 2
- Restricted Rights Legend 2
- Statement of Conditions 2
- Contents 5
- Before You Begin 13
- Text Conventions 14
- Acronyms 15
- Hard-Copy Technical Manuals 17
- How to Get Help 18
- Chapter 1 19
- Startup Files 20
- Startup Options 21
- The Boot Process 23
- Configuration file 28
- TFTP request 28
- TFTP transfer 28
- Recommendations 34
- Directed Netboot 35
- Local Boot 36
- EZ-Install 37
- Chapter 2 41
- Setting Up a UNIX Boot Server 41
- Setting Up a BootP Server 42
- (continued) 46
- (continued) 46
- Setting Up a TFTP Server 49
- <user_id> 51
- <group_no.> 51
- Rebooting Your Workstation 52
- Issuing a Hang-Up Signal 52
- What to Do Next 53
- Chapter 3 55
- Creating Configuration Files 56
- Table 3-2 57
- Preparing an Image 59
- Enabling Router Interfaces 64
- Chapter 4 69
- <serial_options> 73
- <interface> 73
- <next_hop_address> 73
- <interface> 75
- Verifying Your Configuration 78
- Chapter 5 81
- Managing ANH Repeater Ports 81
- Appendix A 87
- Site Manager Parameters 87
- Netboot Interface Parameters 90
- Appendix B 97
- Router Fails to Netboot 99
- 308614-14.00 Rev 00 100
- Displaying Parameter Settings 106
- Debugging the BootP Server 108
- <rel> 110
- <IP_address> 111
- IP_address 111
- Upgrading the Software Image 113
- Restoring a Local File System 114
- Hints and Notes 115
- Implementation Notes 116
- Appendix C 117
- What Is Quick-Start? 118
- Using the Worksheets 118
- Global Information Worksheet 120
- Router Protocol Worksheets 122
- OSPF Worksheet 123
- Wide Area Protocol Worksheets 125
- Frame Relay Worksheet 127
- PPP Worksheet 127
Relacionado con productos y manuales para Routers Avaya Configuring BayStack Remote Access
Routers Avaya FireWall-1 Manual de usuario
(54 paginas)
(54 paginas)
Routers Avaya Business Communications Manager - Administration - Remote Worker Manual de usuario
(24 paginas)
(24 paginas)
Routers Avaya BCM50 Manual de instalación
(295 paginas)
(295 paginas)
Routers Avaya 1600 Series Manual de usuario
(100 paginas)
(100 paginas)
Routers Avaya BCM50e Manual de usuario
(441 paginas)
(441 paginas)
Routers Avaya BCM50 Manual de usuario
(28 paginas)
(28 paginas)
Routers Avaya X.25 Manual de usuario
(10 paginas)
(10 paginas)
Routers Avaya BCM50a Manual de usuario
(315 paginas)
(315 paginas)
Routers Avaya BCM50 Manual de usuario
(22 paginas)
(22 paginas)
Routers Avaya BayRS, BCC, and Site Manager Software Version 15.3.0.0 Fixed Anomalies Manual de usuario
(8 paginas)
(8 paginas)
Routers Avaya T1/FT1 Manual de usuario
(38 paginas)
(38 paginas)
Routers Avaya BayStack ARN Routers Manual de usuario
(162 paginas)
(162 paginas)
Routers Avaya (115197-A Manual de usuario
(6 paginas)
(6 paginas)
Routers Avaya BCM50 Manual de usuario
(46 paginas)
(46 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.021 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales