Avaya Configuring BayStack Remote Access Manual de usuario descargar pdf (Pagina 30)

Configuring BayStack Remote Access

1-12

308614-14.00 Rev 00

Local Boot Process

When the BayStack router boots locally, it reads the kernel, application, and string

files embedded in the an.exe or arn.exe software image file on the local PCMCIA

flash memory card.

When you use Local Boot as the initial boot option, you boot a default (generic)

configuration file. You must then run the Quick-Start installation script to

customize the default configuration file. Running the installation script establishes

an IP network interface between the BayStack router and a Site Manager

workstation (Figure 1-6)

Figure 1-6. Establishing an IP Network Interface

Appendix C briefly describes the procedure for customizing the default

configuration file, provides worksheets for preparing to run the procedure, and

explains how to begin the Quick-Start installation script.

IP address = 192.32.10.12

Site Manager

workstation

ASCII console or PC

AN/ANH/ARN

Console port

IP address = 192.32.156.7

Subnet mask = 255.255.255.0

Ethernet port

Corporate IP network

NPA0006A.EPS

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 139 140

Sin comentarios

Avaya Configuring BayStack Remote Access Manual de usuario Pagina 30