Avaya Configuring BayStack Remote Access Manual de usuario descargar pdf (Pagina 119)

Using the Quick-Start Local Boot Procedure

308614-14.00 Rev 00

C-3

Nortel Networks recommends that you fill out the worksheets as follows:

Fill out the Global Information worksheet completely.

This worksheet lists options common to all synchronous interface

configurations.

After you record your protocol selections on the Global Information

worksheet, fill out

one

Router Protocol worksheet.

This worksheet lists options for RIP, OSPF, and static route configurations.

For example, if you select RIP as your routing protocol, you need only fill out

the RIP worksheet.

Fill out

one

Wide Area Protocol worksheet.

This worksheet lists options for Nortel Networks Proprietary PPP, Frame

Relay, Standard PPP, and SMDS configurations. For example, if you select

Frame Relay as your wide area protocol, you need only fill out the Frame

Relay worksheet.

Run

install.bat

inst_arn.bat

as described in “Running the Quick-Start

Script” on page C-13.

Alternatively, a person at the BayStack router remote site can run the

Quick-Start script using a management console modem connection.

Once the router has an initial connection to the network, see

Configuring

and Managing Routers with Site Manager

to configure the router.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 139 140

Sin comentarios

Avaya Configuring BayStack Remote Access Manual de usuario Pagina 119