Avaya Configuring IP Multicasting Services Manual de usuario Pagina 51

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 50
Customizing DVMRP
114064 Rev. B 4-9
Configuring DVMRP Timers
When a router adds or updates a route, it uses configurable aging timers to control
the useful life of the route.
Setting the Route Expiration Timer
The route expiration timer determines how long DVMRP waits for an update
message indicating that a route is reachable. Upon expiration of this timer, this
route is advertised as unreachable until it is refreshed or until it is deleted.
By default, DVMRP sets the route expiration time at 200 seconds.You can use
Site Manager to set the route expiration time from 20 to 4000 seconds.
Setting the Garbage Timer
The garbage timer determines how long DVMRP advertises a route as
unreachable before it removes the route from the routing table. The difference
between the garbage timer and the route expiration timeout value represents the
amount of time that the route will be advertised as unreachable without
subsequent refreshment.
By default, DVMRP sets the garbage timer to 340 seconds. You can use Site
Manager to set the value from 40 to 8000 seconds.
Enter a value that is greater than the value you specified for the route expiration
timer to allow enough time for the route to be advertised as unreachable.
Site Manager: Route Expiration Timeout parameter: page A-3
Site Manager: Garbage Timeout parameter: page A-4
Vista de pagina 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 125 126

Comentarios a estos manuales

Sin comentarios