Avaya Configuring IP Multicasting Services Manual de usuario Pagina 110

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 109
Configuring IP Multicasting Services
A-20 114064 Rev. B
ST2 Interface Parameters
Parameter: Tunneling Enable
Path: Configuration Manager > Protocols > IP > ST2 > Global
Default: Disable
Options: Enable
| Disable
Function: Enables and disables tunneling on a router that has tunneling capability.
Instructions: If you select Yes for the Tunneling Capability parameter, use this parameter to
enable and disable that feature on the router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.1.6
Parameter: Enable
Path: Configuration Manager > Protocols > IP > ST2 > Interfaces
Default: Enable
Options: Enable
| Disable
Function: Enables and disables ST2 on this interface.
Instructions: By default, the router enables ST2 when you add the ST2 protocol to the
circuit. If you want to disable ST2 on the interface, use this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.2.1.2
Parameter: IP Address
Path: Configuration Manager > Protocols > IP > ST2 > Interfaces
Default: None
Options: Any valid IP address
Function: Specifies the IP address of this ST2 interface.
Instructions: Supply a unique IP address in dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.2.1.6
Vista de pagina 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 125 126

Comentarios a estos manuales

Sin comentarios