Avaya Configuring IP Multicasting Services Manual de usuario Pagina 107

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 106
Site Manager Multicast Parameters
114064 Rev. B A-17
IP Configuration Parameters
Parameter: Max Host Response Time
Path: Configuration Manager > Protocols > IP > Multicast > IGMP > Entry
Default: 100
Options: 1 to 100 tenths of a second
Function: Specifies a maximum value for the amount of time that a host must wait before
responding to a query. IGMP places this value in the code field of an IGMP
query.
Instructions: Specify a maximum response time for this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.13.2.1.15
Parameter: IP Address
Path: Select IP from the Select Protocols window and click on OK.
Default: None
Options: 0.0.0.0 or any valid IP address
Function: Assigns a 32-bit IP address to the interface.
Instructions: Enter the IP address of the interface in dotted-decimal notation. Enter 0.0.0.0 to
configure an unnumbered interface on the circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.4
Parameter: Subnet Mask
Path: Select IP from the Select Protocols window and click on OK.
Default: None
Options: The Configuration Manager automatically calculates an appropriate subnet
mask, depending on the class of the network to which the interface connects.
However, you can change the subnet mask with this parameter.
Function: Specifies the network and subnetwork portion of the 32-bit IP address.
Instructions: Either accept the assigned subnet mask or enter another subnet mask in
dotted-decimal notation. Enter 0.0.0.0 if you are configuring an unnumbered
interface on the circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.6
Vista de pagina 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 125 126

Comentarios a estos manuales

Sin comentarios