Avaya Configuring DLSw Services Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
Data Link Switching Overview
1-9
Integrated SDLC Conversion
Integrated SDLC conversion enables existing SDLC traffic to share a backbone
network with LAN traffic without an intervening TCP/IP network. Traffic enters
the DLSw router as SDLC and goes out the router as LLC2 over Token Ring or
Ethernet. The destination endstation can reside on the Token Ring or Ethernet
directly connected to that DLSw router. SRB can forward the traffic through the
network to a destination host or endstation. In this network, the local router
performs the SDLC conversion, and forwards the traffic across the network to the
host (Figure 1-5).
Figure 1-5. SDLC Conversion in a Single-Switch Configuration
In Figure 1-5, the SDLC clients appear to both the network and the Token Ring
LAN-attached host as if they were natively LAN-attached.
Client
Router
Router
Host
Client
Client
Modem
Sharing
Device
LAN
TCP/IP
Network
SDLC
SDLC
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 203 204

Comentarios a estos manuales

Sin comentarios