Avaya Configuring DLSw Services Manual de usuario Pagina 128

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 127
Configuring DLSw Services
5-28
2.
Type the 0x prefix and then enter a hexadecimal value for the SAP
parameter.
Valid SAP addresses include even values 00, 04 to EC, and F0.
3. Click on OK.
This saves your entry to the router configuration file. The DLSw SAP
Configuration window reappears (refer to Figure 5-15) with the new entry
added to the list of existing DLSw SAPs.
4. Repeat Steps 1 through 3 for each SAP you want to add.
5. Click on Done.
The Configuration Manager window reappears.
Following is a description of the SAP parameter.
Parameter: SAP
Default: None
Options: An even-numbered SAP address (00, 04 to EC, F0) in hexadecimal
format
Function: Specifies the destination service access point (SAP) address associated
with a communication subsystem on a remote device (for example, on a
PC or host).
Instructions: Begin the address with 0x and type the SAP address associated with a
specific communication subsystem. For example, the SAP associated with
NetBIOS is 0xF0.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.4.1.2
Vista de pagina 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 203 204

Comentarios a estos manuales

Sin comentarios