Avaya Configuring DLSw Services Manual de usuario Pagina 147

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 146
Editing DLSw Parameters
5-47
Parameter: Link Address (hex)
Default: None
Options: Any valid hexadecimal link station address from 0x01 to 0xFE
Function: Specifies the address of the link station.
Instructions: Type 0x followed by the link station address.
MIB Object ID: N/A
Parameter: Disable
Default: Enable
Options: Enable | Disable
Function: Enables or disables the DLSw local device.
Instructions: Set to Disable if you want to temporarily disable the local device, rather
than delete it. Set to Enable if you want to reinitialize the local device.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.2
Parameter: PU Name
Default: None
Options: Any valid, 8-byte ASCII name
Function: Specifies the name of the adjacent link station. This name uniquely
identifies the station for statistics and Alert messages.
Instructions: Type the 8-byte ASCII link station name.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.32
Vista de pagina 146
1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 203 204

Comentarios a estos manuales

Sin comentarios