Avaya Configuring DLSw Services Manual de usuario Pagina 151

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 150
Editing DLSw Parameters
5-51
Parameter: Destination (Host) SAP (hex)
Default: 0x4
Range: 0x01 to 0xFE
Function: Identifies (with the Destination MAC) the Token Ring or Ethernet host the
local device will reach via SDLC services.
Instructions: Consult your host system manager for the host SAP address. Type 0x
followed by a 1-digit or 2-digit hexadecimal address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.9
Parameter: MAXOUT
Default: 7
Range: 1 to 127
Function: Controls the maximum number of consecutive frames that an SDLC link
station can send without acknowledgment.
Instructions: Type a value from 1 to 127.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.10
Parameter: MAXDATA
Default: 2057
Options: 265 | 521 | 1033 | 2057
Function: Specifies the maximum frame size SDLC supports. This value includes
the Transmission Header (TH) and Request Header (RH).
Instructions: Enter a maximum frame size that is equal to or larger than the largest
frame size that will be received.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.7
Vista de pagina 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 203 204

Comentarios a estos manuales

Sin comentarios