Avaya Configuring DLSw Services Manual de usuario descargar pdf (Pagina 113)

Editing DLSw Parameters

5-13

Enabling a DLSw Interface

You can use the Conﬁguration Manager to enable or disable a DLSw interface on

a speciﬁc circuit. To access the DLSw interface parameters from the

Conﬁguration Manager window (refer to Figure 5-1).

1. Select Protocols➔DLSw➔Interfaces.

The DLSw Interface Conﬁguration window appears (Figure 5-3).

Figure 5-3. DLSw Interface Conﬁguration Window

Select an interface from the list.

The interfaces appear in the form <circuit_name>.llc2

3. Change the setting of the Enable parameter, if necessary.

(Refer to the parameter description that follows this procedure.)

4. Click on Apply to save your change.

5. Click on Done.

The Conﬁguration Manager window reappears.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 203 204

Sin comentarios

Avaya Configuring DLSw Services Manual de usuario Pagina 113