Avaya Configuring DLSw Services Manual de usuario Pagina 172

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 171
Configuring DLSw Services
6-18
6.
Enter a bandwidth.
The bandwidth for queue number zero must be greater than 0. You can assign
any percentage between 0 and 99 to subsequent queues, as long as the
combined bandwidth for all queues totals 100 percent.
On low speed lines running NetBIOS, you should allocate 20% of the total
bandwidth due to endstation timing.
7. Click on OK.
The Add/Edit/Delete Queues window reappears.
8. Continue to add queues until the total bandwidth is 100 percent.
Repeat Steps 3 through 7 until the total bandwidth is 100 percent. Figure 6-12
shows a sample screen after adding queues.
Figure 6-12. Configured Queues
9.
Click on Done.
Vista de pagina 171
1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 203 204

Comentarios a estos manuales

Sin comentarios