Avaya BCM 2.0 Programming Guía de usuario Pagina 322

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 446
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 321
322 Troubleshooting your Enterprise Edge system
Enterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01
Dialed number gets ringback and the wrong person
The digits sent by a switch at acentral office or in the private network did not match
any Received number or the Auto DN. The call has been routed to the prime
telephone for the incoming trunk. Perform the following steps to determine why
calls are being routing incorrectly:
1. Verify that the switch is sending the correct number of digits for the Received
number length defined in your system.
2. Verify all the digit strings that the switch should be sending.
3. Check that you have defined the corresponding Received number for every
target line in your system.
4. Make sure that the published telephone numbers for your network are correct.
Dialed number gets dial tone instead of ringback
The remote caller has tried to reach an Enterprise Edge target line, but has reached
the Enterprise Edge system instead. The system has mapped the incoming digits
onto the Auto DN. Perform the following steps to determine why the remote caller
cannot reach the target line:
1. Verify all the digit strings that the switch should be sending.
2. Check that you have defined the corresponding Received number for every
target line in your system.
3. Check that you have defined the correct Auto DN for your system.
4. Make sure that the published telephone numbers for your network are correct.
Dialed number gets busy tone
The target line that the incoming digits map onto is busy, and there is no prime
telephone for the incoming trunk. For maximum call coverage, make sure that you
configure a prime telephone for every incoming trunk.
Dialed number does not get through
The problem may be due to one of the following:
Digits do not match Received number or Auto DN on page 323
The Enterprise Edge system did not receive some or all of the incoming digits
on page 323
Vista de pagina 321
1 2 ... 317 318 319 320 321 322 323 324 325 326 327 ... 445 446

Comentarios a estos manuales

Sin comentarios

Verbatim 52416 podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Taśmy LED Verbatim 52416.
Dostarczamy 1 pdf podręczników Verbatim 52416 do pobrania za darmo według typów dokumentów: Arkusz Danych






Więcej produktów i instrukcji dla Taśmy LED Verbatim

Modele Rodzaj dokumentu
52406 Arkusz Danych   Verbatim 52406 energy-saving lamp, 4 strony
52228 Arkusz Danych   Verbatim 52228 energy-saving lamp, 2 strony
52309 Arkusz Danych   Verbatim 8.5W, GU10, 2 strony
52615 Arkusz Danych   Verbatim 52615 LED lamp, 2 strony
52245 Arkusz Danych   Verbatim 52245 energy-saving lamp [en] , 2 strony
52611 Arkusz Danych   Verbatim 52611 energy-saving lamp, 2 strony
97802 Arkusz Danych   Verbatim Globe G25 3000K 500lm, 1 strony
98631 Arkusz Danych   Verbatim P16-L380-C30-B38-W, 2 strony
52703 Arkusz Danych   Verbatim 52703 energy-saving lamp, 3 strony
97799 Arkusz Danych   Verbatim 97799 LED lamp, 1 strony
97958 Arkusz Danych   Verbatim 97958 LED lamp, 1 strony
98388 Arkusz Danych   Verbatim PAR38 3000K 1250lm, 1 strony
52234 Arkusz Danych   Verbatim 52234 energy-saving lamp, 2 strony
98017 Arkusz Danych   Verbatim A19 3000K 480lm, 1 strony
97801 Arkusz Danych   Verbatim Candle 3000K 300lm, 1 strony
52418 Arkusz Danych   Verbatim 52418 energy-saving lamp, 3 strony
52618 Arkusz Danych   Verbatim 52618 LED lamp, 2 strony
52157 Arkusz Danych   Verbatim PAR16 GU10 7W, 2 strony
52143 Arkusz Danych   Verbatim 52143 LED lamp, 2 strony
98575 Arkusz Danych   Verbatim R30-L865--C30-W, 1 strony