
Maintenance 279
P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide
Media Bay Module status
Media Bay Modules selection allows you to view the status of all the modules as
well as identify any device or lines connected to the system. This allows you to
isolate any malfunctioning part of the system. In addition, you can use the Media
Bay Module selection to disable and enable modules and devices. For more
information, refer to one of the following procedures.
• Display the Media Bay Module status on page 279
• Disable a module on page 279
• Enable a module on page 280
• Identify a device connected to the system on page 280
• Disable a device on page 281
• Enable a device on page 281
Display the Media Bay Module status
Use this procedure to display module type, the number of sets connected to the
module, the number of busy sets and the module’s state:
1. Choose Resources, Media Bay Modules.
The window displays Bus 02 through to 08.
2. Click on the Bus you want to view. For example, Bus 02.
The Configuration menu is enabled and the status information of the module
associated with that bus appears.
Disable a module
You must disable a module before you replace it. In addition, you may be able to
clear a hung line by disabling and enabling the affected module.
1. Choose Resources, Media Bay Modules and click on the Bus ## you want to
disable.
The State box indicates that the module is enabled. The Configuration menu
option is enabled.
2. On the Configuration menu click Disable.
The system displays a warning that this action will disable the entire module
and all of its devices.
Use Page feature, on your system, prior to disabling.
Use the Page feature to inform users that you are about to disable a module.
Indicate that they may experience delays in the performance of their devices.
Comentarios a estos manuales