Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
Configuring Traffic Filters and Protocol Prioritization
4-2
This section lists the predefined Data Link and IP criteria for outbound traffic
filters. Refer to Configuring DLSw Services for information about DLSw
outbound filters.
Predefined Data Link Criteria
You can configure outbound filters based on the predefined Data Link header
criteria listed in Table 4-1.
Figure 4-1 shows the Configuration Manager menu path for specifying these
criteria. See Chapter 7 for detailed instructions on creating outbound filters.
Table 4-1. Predefined Data Link Outbound Filter Criteria
Packet Type or Component Predefined Criteria
Data Link Type MAC Source Address
MAC Destination Address
Ethernet Type
Novell
802.2 Length
802.2 DSAP
802.2 SSAP
802.2 Control
802.2 SNAP Length
802.2 SNAP Protocol ID
802.2 SNAP Ethernet Type (Ethertype)
Source Routing DSAP
SSAP
PPP Protocol ID
Frame Relay 2-byte DLCI
3-byte DLCI
4-byte DLCI
NLPID
Ethernet Type (Ethertype)
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 161 162

Comentarios a estos manuales

Sin comentarios