Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
Configuring Traffic Filters and Protocol Prioritization
7-8
Figure 7-6. Add Range Window
7.
Specify the low and high values for the range you want to apply to the
selected criterion.
If the range you want consists of just one value, specify that value in both
boxes. Zero is not a valid entry for Minimum or Maximum value.
8. Click on OK.
The Create Priority/Outbound Template window reappears (refer to
Figure 7-5). The new criterion and range appear in the Filter Information
scroll box.
9. Add additional ranges if you want.
You can add up to 100 ranges for each filter criterion.
10. Select Action, and either IP or Datalink.
11. Select Add Action; then select the action you want to impose on packets
that match any of this template’s ranges of filtering criteria.
Note: When you enter values for the Minimum and Maximum value
paramters, the Configuration Manager assumes the value is a decimal number.
To enter a hexadecimal number, use the prefix 0x.
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 161 162

Comentarios a estos manuales

Sin comentarios