Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario descargar pdf (Pagina 115)

Applying Inbound Traffic Filters

6-23

To change the order of precedence:

1. In the Trafﬁc Filters window, select the ﬁlter whose precedence you want

to change.

2. Click on Reorder.

The Change Precedence window appears (Figure 6-18).

Figure 6-18. Change Precedence Window

Click on either INSERT BEFORE or INSERT AFTER; then, type a ﬁlter

rule number in the Precedence Number box.

The selected ﬁlter will now have a rule number either one higher (if you chose

INSERT BEFORE) or one lower (if you chose INSERT AFTER) the rule

number you entered.

For the example shown, if you wish to place the selected ﬁlter before ﬁlter #1,

click on INSERT BEFORE and type 1 in the Precedence Number box.

4. Click on OK.

You are returned to the Filters window. The ﬁlters now appear in their new

order of precedence (Figure 6-19).

Note: When reversing the order of the second-to-lowest and lowest

precedence ﬁlters, the ﬁlter you select with the Reorder button and the ﬁlter

number you specify in the Precedence Number box are the same. For example:

to put f2 at the bottom of a list of three ﬁlters f1,f2,f3, select ﬁlter f2 and specify

INSERT AFTER, Precedence Number: f2.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 161 162

Sin comentarios

Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 115