Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario descargar pdf (Pagina 101)

Applying Inbound Traffic Filters

6-9

Figure 6-8. Add Range Window

Specify the low and high values for the range you want to apply to the

selected criterion.

In this example (refer to Figure 6-8), the range for the MAC source address

criterion is from 0x0000A20001 (the minimum value) to 0x0000A200003

(the maximum value). Each incoming packet will be checked to see whether

its MAC source address falls into this range of addresses.

If the range you want to add consists of just one value, specify that value in

both boxes.

7. Click on OK.

You return to the Create Filter Template window. The new criterion and range

appear in the Filter Information scroll box (Figure 6-9).

Note: When you enter values for the Minimum and Maximum value

paramters, the Conﬁguration Manager assumes that the value is a decimal

number. To enter a hexadecimal number, use the preﬁx 0x.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 161 162

Sin comentarios

Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 101