Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
Specifying Common Criterion Ranges
308645-14.00 Rev 00
5-5
Specifying Frame Relay NLPID Ranges
Table 5-4 lists some common Frame Relay network layer protocol ID (NLPID)
values. You use these values to specify ranges for NLPID criteria in an outbound
traffic filter.
Specifying PPP Protocol ID Ranges
Table 5-5 lists some common PPP protocol ID values. See RFC 1700 for a
complete list. You use these values to specify ranges for Protocol ID criteria in an
outbound traffic filter.
Table 5-4. Frame Relay NLPIDs
NLPID (0x) Description
CC*
* Use this value only to specify ranges for the criterion selected by choosing
Criteria > Add > IP > Frame Relay > NLPID on the Create Priority/Outbound
Template window. Do not use a data link criterion to specify IP traffic.
IP
81, 82, 83 OSI
80 SNAP
Table 5-5. PPP Protocol IDs
Protocol ID (0x) Description
0021*
* Use this value only to specify ranges for the criterion selected by choosing
Criteria > Add > IP > PPP > Protocol ID on the Create Priority/Outbound
Template window. Do not use a data link criterion to specify IP traffic.
IP
0023 OSI
0033 Stream Protocol (ST2)
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 183 184

Comentarios a estos manuales

Sin comentarios