Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario descargar pdf (Pagina 58)

Configuring Traffic Filters and Protocol Prioritization

3-8

308645-14.00 Rev 00

DLSw Criteria and Actions

You can filter inbound DLSw traffic based on specified bit patterns in the DLSw

header, as defined in RFC 1434.

Predefined DLSw Criteria

Table 3-5 lists the predefined criteria for DLSw inbound traffic filters, and the

reference field, offset, and length for each criterion.

User-Defined DLSw Criteria

In addition to the predefined DLSw filter criteria, you can create inbound traffic

filters with user-defined criteria by specifying an offset and length to these

reference fields in the DLSw header:

DLSw Actions

The DLSw filtering actions are as follows:

• Drop, Log -- Common to all inbound traffic filters

• Forward to Peer -- Any frame that matches the filter will be sent to the

specified DLSw circuits

Table 3-5. Predefined Criteria for DLSw Inbound Traffic Filters

Criterion Name Reference Field Offset Length

Destination MAC Address DLS_BASE 192 48

Source MAC Address DLS_BASE 240 48

DSAP DLS_BASE 296 8

SSAP DLS_BASE 288 8

Reference Field Description

DLS_CTRL_START Points to the start of the DLSw header

DLS_DATA_START Points to the start of the DLSw data

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 183 184

Sin comentarios

Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 58