Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario descargar pdf (Pagina 112)

Configuring Traffic Filters and Protocol Prioritization

7-4

308645-14.00 Rev 00

Preparing Outbound Traffic Filter Templates

To add an outbound traffic filter to an interface, you apply an outbound traffic

filter template to the circuit. However, you do not always need to create a

template; often, you can begin with an existing template.

This section describes how to prepare an outbound traffic filter template by:

• Creating a Template

• Customizing Templates

See “Creating an Outbound Traffic Filter

” on page 7-13 to learn how to create a

traffic filter by applying (saving) a filter template to an interface.

Creating a Template

To create an outbound traffic filter template:

Note:

Changing a traffic filter template does not affect interfaces to which the

template has already been applied.

Site Manager Procedure

You do this System responds

1. Display the Priority/Outbound Filters

window (Figure 7-1)

2. Click on

Template

. The Filter Template Management window

opens (Figure 7-3).

3. Click on

Create

. The Create Priority/Outbound Template

window opens (Figure 7-4).

4. Specify a descriptive name for the

template in the Filter Name field.

For example, use the name

Bridge01to03

for a template that contains information to

filter bridge frames from the MAC source

addresses 0x0000A2000001 to

0x0000A2000003.

(continued)

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 183 184

Sin comentarios

Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 112