Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario descargar pdf (Pagina 44)

Configuring Traffic Filters and Protocol Prioritization

2-10

308645-14.00 Rev 00

Enabling Protocol Prioritization on an ATM Circuit

You can now set the priorities for the traffic sent across a HSSI and ATM line

interface using protocol prioritization.

You must manually start protocol prioritization on both a HSSI line interface and

an ATM circuit. However, the steps required to enable protocol prioritization for

ATM differ from the steps for all other circuit types. For ATM, you can use

protocol prioritization for IP traffic travelling over an ATM PVC.

To enable protocol prioritization for an ATM circuit:.

From the ATM Priority List window, you can edit configuration parameters, as

described in Configuring ATM Services.

For more information about protocol prioritization and how to configure and

outbound traffic filter with a priority queue action, see Chapter 7.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM1 connector on which you

want to configure protocol prioritization.

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

PVC Protocol Priority

. The ATM PVC Protocol Priority window

opens.

4. Click on

Priority Interface

. The ATM Priority Interface List window

opens.

Note:

You cannot change the percent of bandwidth for the priority queues

when configuring protocol prioritization over ATM.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 183 184

Sin comentarios

Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 44